• ALUMINIUM
• XL Gutters & Pipes
• Standard Gutters & Pipes
• Cast Aluminium Gutters
• Cast Aluminium Hoppers
• Installation

• XL & Standard Pipes
• XL Gutters
• Standard Gutters
• Cast Aluminium Gutters

Aluminium Installation Instructions - Cast Aluminium Gutter

1. Fix gutter brackets at 600mm centres to give correct line and level. Use appropriate length stainless steel screw.
2. Place gutter in position, ensuring correct line and level.
3. Use only stainless steel screws and place through washer provided.
4. Apply 2 no. 6mm bead of low modulas silicone to joint and around bolt hole.
5. Insert 25 x 5mm stainless fixing bolts from the underside of the gutter. Do not over tighten.
6. Remove any surplus sealant from faces of gutter.
7. Fix to fascia board at 600mm centres through oversize hole to allow for expansion and contraction using 32mm stainless steel screws and washer.
8. Gutter bolts may be touched up using touch up paint provided.
9. Gutter may be cut using a fine tooth hacksaw or power saw with aluminium blade. Ensure any burr is removed with a file.
10. Ensure any cut ends are coated using the touch up paint provided.