Aluminium Installation Instructions - XL & Standard Pipes
- Place rainwater pipe in correct position and mark wall through pre-drilled holes in ears of pipe.
- Drill wall using appropriate masonry bit.
- Use only stainless steel screws and place through steel washer and sela washer provided.
- Fix through pre-drilled pipe ears using appropriate length screws and plugs to obviate pull out.
- When fixed securely, push on sela cover to conceal screw head.
- Ensure pipes are plumb and offer up next pipe or component.
- Fit in to socket leaving approx. 5mm gap for expansion and contraction.
- Joints between sections can be pointed with silicone if required.
- Bobbins are available to ensure a straight line to rainwater pipes where the building surface may be uneven.
- Pipes may be cut to length using a fine tooth hacksaw or power saw with aluminium blade. Ensure any burr is removed with a file.
Rainguard is top of the list for listed buildings
Yeoman Rainguard gives victorian mansion a new lease of life
Rainguard earns a round of applause for radius gutters
Yeoman Rainguard Copper Range
